HiTEC Flash 7 2.4GHz AFHSS Transmitter and Optima 7, 7ch Rx 2.4GHz
AFHSS/SLT 4096 Res.. Mode 2 (2210505)
Advanced 7-channel, Telemetry Capable Computer Radio
Whether you are
a glider, scale, aerobatic or sport pilot, the Flash 7 is the perfect
radio for you.
- Built in AFHSS 2.4GHz / SLT
- Smooth and precise 4096 resolution
- Fast 7ms frame rate latency (using
- Acro / Glider / Helicopter programming
- Easy to read backlit LCD screen
- Intuitive push button and jog dial
- Conveniently located sliders
- Dynamically assignable switches, knobs
- DCS port (battery voltage power out)
- 20 model memory
- 8 character model naming
- Telemetry enabled
- 2 fully assignable timers.
Suitable for both beginners and experts the Flash 7 is the staple club set in Hitec’s line of aircraft computer radios.
With advanced built-in AFHSS / SLT flexibility, impressive 4096 resolution and ultra-low latency, this affordable, feature-packed combo brings ease of use and incredible functionality to all pilots.
The Flash 7 allows you to store up to 20 models (more than enough for most of us) and has full telemetry capability to help you keep your finger on the pulse of all your models.
Supplied complete with an Optima 7-channel receiver it even comes with
HiTEC's legendary reliability pre-installed!
- 20 Models Memory
- Servo Reverse
- Sub Trim
- Exponential (ch.1 2 & 4)
- Dual Rates (ch.1 2 & 4)
- Data Reset
- Model Select
- Mode Change (Mode 1/2)
- One P-Mix
- Throttle Cut or Trainer
- Three Flight Condition
- Swash Select (120° CCPM/90° Mechanical)
- Rudder-Throttle Mix
- 5 Point Throttle Curve
- 5 Point Pitch Curve
- Throttle Hold
- Revo Mix
- Gyro Gain
- 1 Nor and 2 Idle-ups
- Flaperon Mix
- Elevon Mix
- V-Tail Mix
- Aileron-Rudder Mix
- Elevator-Flap Mix
- Camber or Reflex
HiTEC 2.4 GHz AFHSS Equipment Updates
Its Important to Keep your Equipment
Up-to-Date. Latest firmware update version V1.03(0)
1 x Flash 7 transmitter
1 x Optima 7 telemetry enabled receiver
1 x Heavy-duty switch harness
1 x BODA antenna holder
1 x SPC cable
1 x Full printed instruction manual
1 x Hitec decal sheet.
Needed to complete
4 x AA batteries for the transmitter
Please Note: Due to size and weight limitations we
are unable to ship Transmitters outside of the UK
Due to having our knuckles severely rapped by the Post Office we can no longer send any kind of battery via the post. Any order containing batteries will have to be sent via courier and this will incur a minimum of a £9.49 delivery and packaging charge.
We can not deliver batteries outside of mainland UK