|
Futaba T6K-V3S 2.4GHz T-FHSS (Dry) & R3006SB Receiver Combo (Mode
2) (P-CB6K3/L) |
Futaba T6K-V3S- Transmitter comes with R3006SB Receiver
|
With the latest V3.0 software update the T6K-V3S is now capable of operating up to 8 channels alongside a selection of extra features.
A mid-range, 8 Channel, 2.4GHz aircraft computer radio system for pilots
of intermediate and advanced ability comes with R3006SB
Receiver
What else is new in the V3S version?
The T6K-V3S has an additional aileron mix for glider models without motor, acting on channels 1 and 3. For gliders, a total of 4 flight conditions can now be programmed. The trim mixer now also includes the rudder. Two independent stopwatches / timers are now available. The top right toggle switch is now a 3 position switch and in the Helicopter Menu, many governor functions can be adjusted directly from the transmitter.
The Futaba T6K is the perfect entry/sport level radio for aircraft and helicopter pilots. This stylish, stealth looking transmitter features a
clean in-built aerial, easy jog dial programming and a backlit LCD screen for ease of use, however the T6K is not only about style, it also includes
many features you would normally expect in high-end transmitters.
Designed to take full advantage of Futaba's popular T-FHSS telemetry system so a wide array of data can be monitored in flight (on screen or using
the in-built speaker) including as standard receiver battery voltage and external battery voltage, whilst temperature, RPM, altitude and even a
variometer sensors are available as options . The T6K is also capable of using S.Bus/S.Bus2 servos which can be easily programmed via the transmitter,
whilst these and standard servos can all be used with the supplied R3008SB receiver.
Key Features
- S-FHSS/T-FHSS selectable
- Telemetry system (T-FHSS) with data speech function for monitoring receiver battery voltage, external voltage, temperature,
RPM, altitude and variometer
- Built-in antenna
- S.Bus/S.Bus2 servo setting functions programmable through the transmitter
- Preset vibration alarms
- 30 model memory
- 8-character model/user naming
- Programmable mixes for airplanes, helicopters, gliders and multi-rotors
- Digital trims with variable step settings
- Adjustable stick length and tension
- Changeable switch/VR position and AUX channel function
- Throttle position warning
- Backlit 128x64 DOT LCD screen with adjustable display contrast
- Software updateable through the CIU-2
- Screen Lock
- Earphone/S.Bus/Trainer jacks
- Assignable switches (three 3-position, one 2-position)
- Range Check
- Program navigation bay with jog dial, +/- pads and end pad
- Data reset
- Model copy
- Selectable model type
- Fail Safe
- End Points
- Trim/Trim Resets/Trim Steps
- Sub Trim
- Servo Reversing
- Parameter functions
- Servo monitor/Test
- Wireless model data transfer
- Timer-System and Model (Up/Down)
- Trainer system
Comprehensive feature list:
Airplane Functions
- Wing Type (5-wing, 2-tail)
- Throttle Cut
- Dual Rate/Expo
- Throttle Curve
- Idle down
- Gyro
- Aileron differential
- V-Tail
- Camber
- Air Brake
- Elevator-to-Flap mixing
- Flap-to-Elevator mixing
- Elevon mixing
Glider Functions
- Wing Type (5-Wing, 2-Tail)
- Condition select
- Dual Rate/Expo
- Motor switch
- Gyro
- Aileron Differential
- V-tail
- Butterfly mixing
- Trim mixing
- Elevator-to-Camber mixing
- Camber mixing
- Aileron-to-Camber mixing
Helicopter Functions
- Swash type (6)
- Condition Select
- Throttle Cut
- Dual Rate/Expo
- Trim Offset
- Delay
- Gyro mixing
- Swash AFR
- Swash mixing
- Throttle Curve (5-point)
- Pitch Curve (5-point)
- Pitch-to-Rudder mixing
- Throttle Hold
- Hovering throttle
- Hovering pitch
Multicopter Functions
- Flight Mode
- Center alarm
- Dual Rate/Expo
- Throttle Curve
- Throttle Delay
- Gyro
Required for use:
4x 'AA' batteries for transmitter & suitable
Rx battery.
Please Note: Due to size and weight limitations we
are unable to ship Transmitters outside of Mainland UK
Please Note
Due to having our knuckles severely rapped by the Post Office we can no longer send any kind of battery via the post. Any order containing batteries will have to be sent via courier and this will incur a minimum of a £9.99 delivery and packaging charge.
We cannot deliver batteries outside of mainland UK
|