| 
ARR020PV Arrow Hobbies BAE Hawk EDF PNP
Sleek, powerful and perfectly formed the Arrows Hobby Hawk will be something of an eye-opener to anyone who still thinks EDF jets have some
catching up to do.
Experience the Hawk in action and you'll quickly realise that nothing could be further from the truth. Packing a sweet-sounding
50mm 11-blade fan that's spun up by a precision 2627 4500KV brushless motor, this 3S-fuelled semi-scale Red Arrows jet can't fail to delight
with its flowing aerobatics, cloud punching performance and exceptional speed. But that's not the half of it, the Hawk is also a beautifully
practical model that exhibits exceptional low speed handling, is small enough to transport in one piece, is retract (hassle) free and, moreover,
gets away easily from an underarm launch. Given that it's enticingly budget-friendly and such a good performer, we just know that the Hawk
will become a frequent flyer in your air fleet and, of course, that equates to superb value for money.
Key Features
- High quality pre-painted EPO foam airframe.
- With Vector Stabilisation System.
- Glue- and screw-together assembly.
- Proven pre-installed hardware.
- Superior ball joint control linkages.
- Outstanding power-to-weight ratio.
- Secure magnet-retained canopy.
- Retract-free, fly anywhere simplicity.
- Suits 3S 11.1V 1300 - 2200mAh 60C LiPo.
- Three pre-installed high-quality digital servos.
- Takes standard 4-channel radio (aileron, elevator, throttle).
- Smooth-sounding 11-blade fan.
- 30-minute assembly time.
- 8+ minutes on a 2200mAh LiPo.
What's in the box
- 1x Factory assembled and finished fuselage.
- 1x Factory assembled and finished 1-piece wing.
- 1x Factory assembled and finished 1-piece tailplane.
- 2x Factory finished tip tanks.
- 1x Pre-installed 2627 4500KV brushless motor.
- 1x Pre-installed 50mm 11-blade fan.
- 1x Pre-installed 30A ESC with XT60 connector.
- 3x Pre-installed high quality 9g digital servos.
- 1x Screw set.
1x Comprehensive instruction manual.
Needed to complete
- 1x 4-channel transmitter and receiver combo.
- 1x 3S 1300 - 2200mAh 60C LiPo with XT60 connector.
- 1x 3S compatible LiPo balance charger.
Specification |
Wingspan |
662mm (26") |
Weight |
~475g (1.05lbs) |
Receiver |
Not supplied - Min 4 channel |
Battery |
Not supplied 3S 2200mAh LiPo |
Please Note: Due to size and weight limitations we are unable to ship Kits, ARTFs and/or batteries outside of Mainland UK
Please Note Due to having our knuckles severely rapped by the Post Office we can no longer send any kind of battery via the post. Any order containing batteries will have to be sent via courier and this will incur a minimum of a £9.99 delivery and packaging charge.
We cannot deliver batteries outside of mainland UK
We can also supply
|
128
Bit Secure Shopping