| 
JP Aermacchi MB-339,
50mm EDF PNP (JPDF1201)
If ever a jet were perfectly designed for miniaturisation and conversion to R/C, Aermacchi’s MB-339 would have to be up there with the best
of them.
Designed as an advanced trainer and light attack aircraft the MB339’s inherent qualities are brought to the fore in this smooth-flying,
lightly loaded, 800mm span EPO EDF jet.
But that’s just a hint of the characteristics that make this a model you’ll want to own and fly frequently.
It uses a standard 3S 1800-2200mAh 60C LiPo, its 50mm 11 blade fan and precision 2627 4900KV brushless motor combo
produce enough thrust for genuinely spirited flight and a vertical performance that’ll make you grin from ear to ear.
Take all this, add
a fool-proof hand-launch capability, a benign stall, transport convenience and a colour scheme that quite literally turns heads, and what
you’ve got here
is a perfect first, second or third scale jet for any intermediate or advanced pilot.
Key Features
- High quality pre-painted EPO foam airframe
- Glue- and screw together assembly
- Pre installed hardware
- Outstanding power-to-weight ratio
- Secure magnet-retained canopy
- Clear vacuum-formed canopy
- Retract-free, fly anywhere simplicity
- Suits 3S 11.1V 1600–2200mAh 60C LiPo.
- Three pre-installed high quality analogue servos
- Takes standard 4 channel radio (aileron, elevator, throttle)
- Smooth sounding 11 blade fan
- 60 minute assembly time
What's in the box
- 1x Factory assembled & finished fuselage
- 1x Factory assembled & finished 1-piece wing
- 1x Factory assembled & finished tailplane
- 1x Factory finished fin & fixed rudder
- 1x Pre-installed 2627 4900KV brushless motor
- 1x Pre-installed 50mm 11-blade fan
- 1x Pre-installed 40A ESC with XT60 connector
- 3x Pre-installed high quality 9g analogue servos
- 1x Screw & hardware set
- 1x Comprehensive instruction manual
Needed to complete
- 1x 4 channel transmitter & receiver combo
- 1x 3S 1800- 2200mAh 60C LiPo with XT60 connector
- 1x 3S compatible LiPo balance charger
Please Note: Due to size and weight limitations we are unable to ship Kits, ARTFs and/or batteries outside of Mainland UK
Please Note Due to having our knuckles severely rapped by the Post Office we can no longer send any kind of battery via the post. Any order containing batteries will have to be sent via courier and this will incur a minimum of a £9.99 delivery and packaging charge.
We cannot deliver batteries outside of mainland UK
We can also supply
|
128
Bit Secure Shopping