brushless motors LiPo batteries electronic speed controllers inrunner Motors outrunner motors HiTEC Futaba Transmitters and Receivers servos

4-Max
The Fixed Wing
Electric Flight Specialists

 
<<<  Back
Tel: 01256 782 512
Email us 
Click here to Check us out on Facebook and to get access to special offers and notifications of new releases

BA La Senorita Kit
Only £124.99 (RRP £149.99)

This is a kit of flat bits of balsa wood and ply which
you have to build and cover yourself

BA La Senorita Kit

This is a kit of flat bits of balsa wood and ply which
you have to build and cover yourself.

BA La Senorita Kit

BA La Senorita Kit

BA La Senorita Kit

The above 3 photos are an example of a completely finished model

 

Share on your Facebook Page

BA La Senorita

The La Senorita is a motor glider with 1.5 meter wingspan (59").
It uses 3  channels, it's light and fast and the one-piece curved wing creates the dihedral.

These kits have been very cleverly designed and precisely laser cut, so all you need is a flat building board.

These models dont use a traditional building method where you build the model over a plan. You do get a "pespective plane" See link below.

  • All indications engraved on each piece must always be visible
  • They must always be facing forward, in the case of horizontal and outward in the case of vertical
  • The fittings are accurate, but if there is a need for any adjustment, do it
  • Do not glue before making sure everything is correct. Dry assemble the parts before gluing them
  • You will need some sandpaper of various grades, CA glue and / or wood glue, in addition to epoxy glue.
  • All assembly is illustrated on the A1 format sheet that is supplied with the kit. If the plan is not clear, then notes will be in the assembly instructions

The kit contains all parts of laser cut wood, wire and tubes for linkage, main landing gear in 2mm aluminum, in addition to perspective plan and instruction manual.

Please click here to download the assembly manual

Please click here for the perspective plan

The following links are for videos on YouTube.
They are in Portugese, but may stil help

Fuselage Assembly

Wing Assembly

Tailplane Assembly

Specification

Wing Span

1500mm (59")

Length

970mm (38.2")

Weight

570g /1.25 lbs

Receiver

Min 4 channel (Not supplied)

Battery

3S, 1,300mAh - 2,200mAh (Supplied Separately)

 

Please Note: Due to size and weight limitations we are unable to ship Kits, ARTFs and/or batteries outside of Mainland UK

 

Please Note Due to having our knuckles severely rapped by the Post Office we can no longer send any kind of battery via the post. Any order containing batteries will have to be sent via courier and this will incur a minimum of a £9.99 delivery and packaging charge.
We cannot deliver batteries outside of mainland UK

 

We can also supply

Glues and Coverings, Covering Iron, Soldering Tools, General Tools and Scalpels, Chargers, Charging Accessories

Description Price Quantity
BA La Senorita (RRP £149.99) £124.99
Motor - PO-2830-1350 £25.49
ESC - 4M-ESC30A £17.95
Folding Prop - PP-FPROP9x6 £4.99
Folding Spinner PP-FSPIN38-40 £7.99
Battery - PPL-60C2S-0800 £7.80
Battery - PPL-60C2S-1000 £9.25
4pcs of Servo - 4M-100AMG-022 £21.96
2x Pack of 10pcs of Cyano (CA) Hinges £1.98
Pack of 5 Surface Horn -Medium 16.5×20mm £1.10
Pack of 5pcs of round head machine screw. M2 x 20mm £1.50
Pack of 5pcs of M2 Locknuts / Nylon Locking Nuts £1.88
Pack of 5pcs of 2.0mm, 300mm Z Bend Kit £4.99
Click here for our range of glues and covering materials

 

<<<  Back Top