4-Max
The Fixed Wing
Electric Flight Specialists

Fast cure clean drying 'white' glue. Bonds canopies and plastic parts without blooming.

Fix N Flex is a single part, clear, air drying, flexible adhesive with gap filling properties. It has exceptional surface grip and is very safe to use. The resulting joints are both waterproof & heatproof. It is especially effective where joints need to be strong yet capable of flexing. It also works well you need to fill gaps or need a joint to withstand shocks and vibrations.

A new updated high-tack glue specially designed for the latest generation of foam model aircraft. It bonds Depron, white, blue and EPS foams, wood and plastic. Dries clear and flexible.

Contact adhesive especially designed for bonding Depron, expanded polystyrene and Expanded PolyPropylene (EPP)

High penetrating yellow aliphatic glue for close fitting pre-assembled joints. Drys fast and bonds wood, foam and plastic.
Waterproof when set and produces flex able tougher joints than super glue.

Famous “yellow” wood glue used in professional applications where hard woods are used; dries crisper than PVA giving better sanding. Will not pull joints as it sets resulting in better dimensional stability. Sets at low temperatures, and is water resistant.

Famous “yellow” wood glue used in professional applications where hard woods are used; dries crisper than PVA giving better sanding. Will not pull joints as it sets resulting in better dimensional stability. Sets at low temperatures, and is water resistant.

A thick water based resin that sets to produce an attractive, durable, scratch resistant coating on foam to prevent dings, wear & disintegration. It dries to a surface that can be painted & glued easily and will reduce damage. 250ml covers 0.7 sqm.

. Creates a hard durable surface layer on foam and wood
. Ideal for model aircraft
. Easy to apply
. Seals surfaces, gaps
. Can be over-coated or mixed with acrylic paint
. Is easily glued and worked

Prevents loosening due to high vibration.
Parts disassemble with simple hand tools.

Bonds Wood, Stone, Metal, Ceramic and more. 100% Waterproof. Working time 10-15 mins, Clamp time 1-2 hours, 100% cured in 24 Hours. Sandable, paintable, stainable.

Bonds all types of Wood, Indoor & Outdoor use (not for use below the waterline), 20-30 minute clamp time, fully cured in 24 Hours, Dries natural colour, No clogging lid, Paintable, stainable and sandable.

Bonds all types of Wood, Indoor & Outdoor use (not for use below the waterline), 20-30 minute clamp time, fully cured in 24 Hours, Dries natural colour, No clogging lid, Paintable, stainable and sandable.

All purpose adhesive and sealant. Bonds virtually everything. Rmains Flexable. Contact Adhesive. Max strength in 24-36 hours.

Formulated paste for bonding tissue used on traditional model aeroplanes.The formulation allows delicate tissue paper to be placed onto airframes and smoothed without tearing. Dries clear.

New Formula Cover-Grip adhesive, which enhances film adhesion between model airplane structures and the film itself, thus reducing and preventing film lift. It bonds covering to balsa, foam, plywood etc.
The new formula dries non tacky but is instantly activated with a hot iron at normal temperatures. Use Cover-Grip on film edges round engine bays to bond loose covering film and trim.

A versatile wood grain sealer for balsa, ply and hardwood. High build with simple water clean up and low odour. Coats and seals wood grain prior to painting and finishing. Use with all types of paints including enamel, cellulose, acrylic or epoxy. Stir well before use. Apply with brush and allow to dry. Sands beautifully after 60 mins. Clean brushes with water. Economical in use. Non-flammable. Covers 1.5 sq metres.

A safe, non-toxic alternative to the traditional flammable dope liquid. Its user friendly, non-flammable formula has little odour and brushes are water washable. Furthermore, it is super thin and easily brushes to shrink tissue, drying quickly to a traditional tough fuel proof semi matt finish.
Finishing a model is often the most challenging part of the project and make or break the project. Deluxe have several a great clean and easy way of finishing tissue covered model aircraft ready for paint that is superior to conventional dope.
Eze Dope being non-sticky, dries fast with little odour, has water clean up and safe to use.

Speed Bond is general purpose, fast setting PVA type white wood glue that contains no fillers and is perfect for general modelling uses. It dries to a semi-flexible condition with high strength and is fairly clear in appearance. Speed Bond has a unique solvent chemistry for faster drying and is superior to many D.I.Y. PVA glues.

Enhances and protects foam models.

Look out for Deluxe Materials range of non-tacky finishing resin that have been specially designed for foam models.
Brush these highly adhesive resins onto foam models to improve appearance, surface toughness and protect vulnerable foam skin from damage.
May be used with glass cloth for an even tougher surface. They will also seal trim, decals and most paints and are over-paintable once dry.
These resins require no mixing, have little or no odour and will keep your models looking like new for longer.

Laser-Cut Kit Glue has been designed specifically for the rapid construction of wood and card laser-cut kits.

Its low-viscosity formula has several advantages:
. May be applied before or after assembly
. Dries clear
. May be sanded when dry
. Safe. odourless
. Water clean-up
. Penetrates, bonds and reinforces joints