brushless motors LiPo batteries electronic speed controllers inrunner Motors outrunner motors HiTEC Futaba Transmitters and Receivers servos

The Fixed Wing
Electric Flight Specialists

Est. 2007

<<<  Back
Tel: 01256 782 512
Click here to Check us out on Facebook and to get access to special offers and notifications of new releases


Drawing for PO-3541-1070 Brushless Motor from 4-Max

Share on your Facebook Page


kv 1070kv
Motor Diameter 35mm
Motor Length 41mm
Shaft Diameter 5.0mm
Shaft Length 20mm
Weight 127g
Mounting Hole Size M3.0, pitch 25mm
Mounting Hole Depth 4mm Max
No. of Poles 14
No Load Current 1.3A
Continuous Current 33A
Max Amps (10 Sec) 38A
Recommended Battery 3S / 4S LiPo
Prop 12x6 - 3S LiPo
10x5 - 4S LiPo
Recommended ESC 45A-60A


Motor Part Number F G H
P0-3541-* 50.5mm 6.5mm 3mm


Motor comes with 3.5mm male connectors (fitted)
and rear motor mount and prop driver set

All REARSET's include:

  • "X" Mount and screws to attach it to the motor
  • Bolt on prop driver, washer and spinner
  • 4 bolts to fix prop driver to rotating can of motor
Part Number A B C D E Thickness
PP-REARSET35 53mm 44mm 25mm 25mm 40mm 3mm

All Dimensions are approximate

Please Note
These motors come pre balanced. Do not remove what looks like blue glue from inside the motor as this is what is used to balance the motor

Ideal replacement for the Max Thrust Riot V2 motor and the Max Thrust Rucas V2 Motor. Please note you will also need a new 45mm spinner.
Please use either a 11x5.5 or a 11x7 APCE Prop to keep the current low so you won't have to upgrade the ESC and battery

Part Number Price Quantity
PO-3541-1070 £33.49
Spares & Accessories
Spare Rear Motor Mount + Bolt on Prop Driver £4.20
Replacement Motor Shaft £4.20
Collet Style Prop Driver £3.95
Replacement Bearing Set £6.00
Brushless Electronic Speed Controllers (ESC's)
LiPo Batteries
<<<  Back Top