G.T. Power - Professional Servo Tester
Specification
Dimensions: 96 x 70
x 17.5mm
Powered from either a JST-XH connector on a 2S LiPo or 7.4 - 12V
DC
Features
-
Characteristic of digital servo performance tester
from G.T power:
-
High performance-to-price ratio, combined with proprietary
test algorithm, which guarantee that the test is fast and stable.
-
G.T power tester can be powered by lipo battery through the balance
charging wire adaptor or DC power supply. It is both convenient
and flexible.
-
The rolling menu toolbar makes the operation clear and easy.
-
The function setting is easy and practical which covers most
parameters that end users need.
-
The device is equipped with servo and receiver wires, which
makes the measurement operation a lot easier.
-
The device is equipped with clear and high contrast LCD Monitor
to show individual parameter and menu selection. Which assures
the user will see the testing information accurately and completely.
-
Bigger buttons are used over the smaller ones, which proves good
feedback and reduces misoperations.
LN Mode
This function is used to test the linearity and vibration
of servo.
(This can also be used to test the linearity and vibration
point of ESC)
ED Mode
He function is used to test the endurance of servo.
FP Mode
This function is used to test the servo’s ability
to neutral itself.
(If equipped on the plane, you can find out the
theoretic mid-point of servo exactly)
DB Mode
The function is used to test the dead band of servo.
(It
can also be used to calculate the resolution of servo)
The test
can also be used to choose the servo based on differential timing.
(This
great for models like CCPM which need 3 servos for it’s
rotor head)
SP Mode
This function is used to perform speed test for servo, and it
allows you to choose the most competent servo based on all the
parameters that is performed in the test (E.g. Reaction Time and
Differential Timing)
WP Mode
The function is used to test the ageing and life
of the servo.
There are some certain reparative functions for some
aquiver servos.
PW Mode
This function is used to test the output pulse of connector and
test whether there is any problem on the signal unstable of the
quiver of servo.
|