ARRAH024P Arrow Hobbies F-86 Sabre EDF PNP
Arrows Hobby is making EDF ownership increasingly more attractive with its range of unencumbered, performance EPO jets Ė jets that take all the age-old qualms of getting involved in EDF and consign them to the annals of history.
It all began with the introduction of the outstanding 64mm Marlin, closely followed by the 50mm Viper and, more recently, the 50mm
Hawk and T-33. All superb aeroplanes with delightful flying characteristics and, most importantly, terrific power reserves and incredible duration.
Hereís the cause for excitement; born of the same design principles as the Marlin, equipped with the same powertrain and sporting the same
authoritative performance, the 64mm 4S F-86 is every bit as good with, of course, the added bonus of being modelled on one of the most iconic
fighters of the early jet age.
Not only is this an eye-catching scale model, with an aerobatic envelope to rival the very best that the EDF
world can offer, it's also a jet thatíll look
after you when youíre finding your feet and challenge you when youíve found them. From large sky-eating loops to locked-in point rolls, s-l-o-w full flap
passes and everything in-between, youíll find the F-86 so versatile that itíll quickly become a Sunday favourite.
Assembling the Sabre is simplicity itself and with no glue required you can be airborne within an hour of opening the box. Just add a 4S
2600mAh 60C flight pack, a 5-channel Tx and Rx combo and go punch holes in the sky.
- Authentic EPO foam airframe with scale colour scheme
- Screw together assembly
- High quality hardware
- Ball joint control linkages
- Outstanding power-to-weight ratio
- Magnetic canopy hatch retention
- Suits 4S 14.8V 2200 to 2700mAh 60C LiPo
- Eight pre-installed high quality servos
- Steerable nose wheel
- Quick release undercarriage and drop tanks
- 30 minute assembly time
- Takes standard 5-channel radio.
What's in the box
- 1x Factory assembled and finished fuselage
- 1x Factory assembled and finished 2-piece wing
- 1x Factory assembled and finished 1-piece tailplane
- 1x Factory assembled and finished fin and rudder
- 1x Factory finished drop tank set
- 1x Wing spar
- 1x Pre-installed 2840 3150KV brushless motor
- 1x Pre-installed 40A ESC with XT60 connector
- 8x Pre-installed high quality 9g servos
- 1x Fixed / removable undercarriage and wheel set
- 1x Pre-installed 64mm 12-blade fan
- 1x Screw and pushrod set
- 1x Comprehensive instruction manual.
Needed to complete
- 1x 5-channel transmitter and receiver combo
- 1x 4S 2600mAh 60C LiPo
- 1x LiPo balance charger.
Not supplied - Min 5 channel
Not supplied 4S 2600mAh LiPo
Please Note: Due to size and weight limitations we are unable to ship Kits, ARTFs and/or batteries outside of Mainland UK
Please Note Due to having our knuckles severely rapped by the Post Office we can no longer send any kind of battery via the post. Any order containing batteries will have to be sent via courier and this will incur a minimum of a £9.99 delivery and packaging charge.
We cannot deliver batteries outside of mainland UK
We can also supply