|
DPR Falcon Trainer 62in
Designed by the prolific and world renowned Tony Nijhuis.
If you're about to begin your R/C journey and you're looking for a perfect start, grab an expert and ask them to tell you why the Falcon would be the
ideal choice.
If they know their stuff, they'll talk about the extended moment arm and the in-flight stability that it promotes. They'll mention the high-lift
wing section with its undercambered trailing edge that allows slower flying and a reduced stall speed.
They'll suggest that you can't go wrong with a
trike undercarriage arrangement due to its ease of ground handling and reduced pilot workload during early attempts at taking off.
They'll talk about
the durability and all-weather capability of a larger balsa-built airframe and its eminent suitability for repair and resulting longevity. They'll admit
the practicality of cowl cheeks, an upright engine, easy access and safe starting, and they'll probably confirm that the carefully designed colour scheme
is perfectly suited to assist with orientation at a distance, which is crucial when learning.
Add to this, easy fuselage access, extended flight times,
simple 4-channel control and a quality of build and finish that'll knock your socks off, and herein lies a trainer that won't easily be beaten if learning
to fly quickly and confidently is your aim.
Key Features
- 85% Pre-finished airframe
- Lightweight balsa & ply construction
- Exemplary build & covering standards
- Docile flying characteristics
- Low stall speed
- Full four-channel control
- High lift wing section
- Perfect for raw beginners
- Comprehensive hardware pack
- Upright easy-access engine configuration
- Practical trike undercarriage
What's In The Box
- 1x Pre-built & covered fuselage
- 1x Pre-built & covered 2-piece wing set
- 1x Pre-built & covered tailplane
- 1x Pre-built & covered fin
- 1x Hardware pack (horns, hinges, wheels etc.)
- 1x Trike undercarriage & wheel set.
- 1x Main spar & alignment dowel pack
- 1x Instruction manual
Needed to Complete
- 1x 4-channel Tx / Rx combo
- 4x Futaba S-U305 servos
- 1x SC52A-S two-stroke glow engine
- 1x 11x7" APC propeller
- 1x 2 1/4 inch spinner
Specification |
Wingspan: |
1580mm (62") |
Length: |
1300mm (51") |
Flying
Weight: |
2495g (5.5lbs) |
Battery: |
4S 3300mAh
- 3700mAh 60C Li-Po (Sold Separately) |
Receiver: |
Min 4 Channel
(Sold Separately) |
Please Note: Due to size and weight limitations we are unable to ship Kits, ARTFs and/or batteries outside of Mainland UK
Please Note
Due to having our knuckles severely rapped by the Post Office we can no longer
send any kind of battery via the post. Any order containing batteries
will have to be sent via courier and this will incur a minimum of a £9.99 delivery and packaging charge.
We cannot deliver batteries outside of mainland UK
We can also supply
|
128
Bit Secure Shopping